Relay CV-242
This relay CV-242 works with both the 120 volt and 240 volt central vacuum models listed below.
Changing a central vacuum relay is a simple task that any beginner level Do-It-Yourselfer could tackle.
When you receive your new relay and are getting ready to tackle the project, be sure your central vacuum unit is unplugged. It is a good idea to remove one wire at a time and connect that wire to the new relay one wire at a time. By doing this, there will be no confusion regarding which wire gets connected where. Once the new wires are connected, remove the old defective relay and install the new relay.
Designed to fit the following models:
- AirFLO CFM-2
- AirFLO CFM-3
- FloMaster Model 19
- FloMaster Model 31
- FloMaster Model 32
- FloMaster Model 34
- FloMaster Model 45
- FloMaster Model 19
- FloMaster Model 64
- FloMaster Model 72
- Modern Day Model A
- Modern Day Model B
- Modern Day Model B2
- Modern Day Model E
- Modern Day Model E2
- Modern Day Model E3
- Modern Day Model G23
- Modern Day Model J
- Modern Day Model QE2
- Modern Day Model QE3
- Modern Day Model SR
- Modern Day Model SV
- Modern Day Model SVT
- Silent Master S1
- Silent Master S2
- Silent Master S3
- Silent Master S4
- Silent Master SP2
- Silent Master SP22
- Silent Master SP3
- Silent Master S44
- Silent Master S5