AirVac VM4200DS Standard Electric Attachment Set Direct Connect

VM4200DS Standard Electric Direct Connect Accessory Tool Kit

Genuine Factory Original AirVac Attachment Set

The AirVac VM4200DS Standard Electric Central Vacuum Accessory Package is a selection of popular central vacuum tools and accessories. The VM4200DS is an attachment set which will include everything you need to effectively and efficiently clean all flooring surfaces in your home.   The VM4200DS is a direct connect attachment set, which means it is designed to be used with electric inlets with 120 volts to them.  If your inlets are standard and not direct connect, you will need an attachment set with the 6 ft pigtail cord on the end of the hose.  Look here for the VM2200DS pigtail electric attachment set. If you're not sure which type of inlets you have, check out the detailed description below.   

If you are looking for a high quality cleaning attachment set, look no further. The AirVac VM4200DS will not disappoint you when it comes to cleaning and durability. This tool kit includes the German designed and manufactured electric VM458 Powerhead. Check out all the features and benefits of the VM4200DS, then click “Add to Cart” to add this attachment set to your central vacuum cleaning team.

More about the VM458 Powerhead:

The VM458 powerhead includes an integrated wand which means the electric cord is connected to the wand, so when the wand is disconnected, the power is also disconnected. When the wand is connected, it locks to the hose and powerhead securing the electrical connection. Imagine a powerhead with no clumsy cords, and you are imagining the AirVac VM458 powerhead. Not only is this convenient, it is a tremendous time saver. The AirVac telescoping wand is one of the smoothest telescoping wands offered at CentralVacuumStores.com. The telescoping wand's double action features the AirVac QDC (Quick Disconnect) end. This wand makes setting the height quick and easy. The QDC powerhead is so simple to disconnect at the base, all you do is step on the release and pull.

The Contemporary design of this nozzle was done specifically for the U.S. market with all the functions and features of a European powerhead. The VM458 offers unmatched performance. If the parking system with an integrated on/off switch, ultra-bright, energy efficient, fluorescent light, and motor management don’t convince you to look at this powerhead, then consider it’s ability to really clean your bare floors and carpeting. Check out the additional VM458 features and specifications below.

• ABS plastic hood and base is sturdy and lightweight, the perfect marriage for easy cleaning
• QDC Wands quick disconnect for simple management of the electrical hose connection
• Double swivel neck increases maneuverability to get around the tightest spots
• Fiber reinforced geared belt for long life
• LED operational indicating safety control lamp turns red to let you know the powerhead is not operating properly and green when it is operating properly.
• Belt is located on the opposite side of the dirt path to protect it from objects that might damage the belt
• Parking feature means the powerhead turns off when the wands are in the upright position and restarts when the handle is released into the normal cleaning position.
• Non-Marring bumper keeps walls and furniture scuff free
• Four soft wheels add to the maneuverability and protect bare floors
• Chevron designed bristles help guide debris toward the vacuum and provides constant and even brush contact to the floor which prolongs the life of the belt, bearing, and motor
• Energy Efficient Fluorescent headlight
• 13.5” Cleaning Path

AirVac VM458 Powerhead Specifications:

• Voltage - 120V
• Hertz - 60 Hz
• Wattage - 250W
• Amperage - 2.0A
• Motor Manufacturer - AMETEK Italia
• Circuit Protection - Amperage Sensitive – Manual Reset
• Breaker Reaction Time - > 1 Second
• Motor RPM (Nominal) - 23,000
• Indicator Lights - Green - Normal, Red - Stopped
• Neck
  • Pivot - 90º
  • Swivel - 180º
  • Release - Pedal
• Height - 3.25" (82mm)
• Width - 13.25" (350mm)
• Weight - 8 Pounds (3.6 Kg)
• Headlight - Durable / Long Life Fluorescent
• Wheels – Front - 0.75" (15mm) Dia. X 0.25(5mm) Wide, Back - 2.25" (55mm) Dia. X 1.125(3mm) Wide
• Brush – Pattern - Double 'V' Chevron
• Brush – Uninterrupted Width - 12"
• Brush RPM – Free Float - 8,500
• Brush RPM – Plush - 4,600
• Brush Bearings - Extra Long Brass Sleeve Bearings
• Hard Floor Wiper Blade - TPU

Attachment Set Included Components:

	A 30ft Electric Direct Connect Hose is included. It is a 1-1/4" diameter crushproof hose with a swivel handle and a three-position switch which gives you the capability to control power to both your vacuum and your powerhead. If you're not sure what types of inlets you have, see below.
	The VM458 Powerhead is a black electric powerhead for this attachment set. See the details of this powerhead above.
	A 12 inch barefloor brush is perfect for any hard surface you want to clean. With the larger brush, you can clean more flooring in less time. It is great for tile, marble, vinyl, laminate, and hardwood floors. Even if your floors have deep grout, the brushes on this tool will grab the dirt out of the cracks on every pass. The swivel design allows you to get low, underneath counters and furniture. A central vacuum bare floor tool makes quick work of cleaning because they are light and easy to use. If you have throw rugs, a bare floor tool will also allow you to gently clean them without worrying about sucking them up.
	Two Telescoping wands are included for use with the powerhead and other attachments. One has the cord management included for use with the powerhead and the other is for use with the other attachments. However, some people want more wands. You may want to consider purchasing extra wands. Often customers like to keep an extra set of wands and a bare floor brush in their garage, utility closet, or kitchen pantry. This allows them to just pull out their hose and they are ready to clean in the garage, bathroom, upstairs, or wherever. In addition, an extra set of wands allows you to extend your cleaning capability beyond the length of two wands (traditionally 42”). If you have high ceilings or ceiling fans, an extra set of extension wands can really be handy for getting those hard to reach areas.
	The Dusting Brush has natural 1 1/2 inch bristles. A small tool with full bristles, the dusting brush has traditionally been used for dusting furniture, baseboards, lamps, and lamp shades. You can go even further with a good dusting brush and take your cleaning to a new level. A central vacuum system with a good dusting brush is ideal for cleaning screens, air conditioning vents, refrigerator coils, permanent air filters, ceiling fans, blinds, window frames, crown molding, and light fixtures.
	An Upholstery tool is a standard cleaning accessory found in this central vacuum attachment set. The standard upholstery tool usually includes an elongated tool with or without short bristles.  The central vacuum upholstery tool is designed for cleaning furniture and car upholstery. Most upholstery tools are constructed of a heavy duty plastic. There are, however, a wide variety of upholstery tools designed for a wide variety of cleaning applications. This tool has a removeable brush strip so you can use the upholstery tool with or without the brushes.  If you are looking for a deeper cleaning tool for your upholstery, consider a hand held power brush.
	A crevice tool is ideal for cleaning hard to access…well, crevices. These tools are thin and narrow and allow you to get into small areas with your central vacuum system. The crevice tool included with this kit is 9 inches long. But crevice tools come in a variety of lengths…anywhere from 4” all the way up to 36”. The longer crevice tools are perfect for getting under your refrigerator or very low furniture. The flexible crevice tool is perfect for cleaning the lint trap on your clothes dryer. If you want to look at the different crevice tools we carry, click here.
	A tool caddy allows you to vacuum your floors carrying tools attached to your vacuum wand. This saves you time. For instance, when vacuuming your floors if you notice the ceiling fan is dusty, no problem. Without look for the dusting brush in your closet, you simply remove it from the attached tool caddy, put on the dusting brush and voila, you can clean the fan right then and there. A tool caddy puts the tools you need at your fingertips.
	A hose hanger allows you to easily store your hose when not in use. You can mount it on a closet door or the wall of your garage and store your hose neatly coiled up to prevent kinks. It not only saves space, but also protects your hose.
	A canvas tool bag allows you to easily store your tools when not in use. You can put it in your closet or hang it up where you choose. Use it to carry the tools with you as you clean if you prefer doing that. By having a place the tools belong when you're not using them, you'lll be less likely to misplace them.

Determine What Type Of Inlets You Have

What do you need: an electric direct-connect hose or an electric pig-tail attachment set?

 
If you are just not sure whether or not you need a direct connect or pigtail attachment set, we can help.  First, don't hesitate to call us at 1-800-221-8227 and we can ask you a few simple questions to make sure you get the perfect hose for your central vacuum system. OR...you can follow below right here to walk you through your choices.

The best way to decide whether you need a direct connect electric hose or a pigtail electric hose is by determining what type of inlets you have. Standard inlets will require the use of an electric pigtail hose.

More About Central Vacuum Attachment Sets and Other Accessories

The attachment set you use is one of the most important aspects to your central vacuum system. At CentralVacuumStores.com, no matter what flooring you have, we have an attachment set for you. If you are looking for a basic garage attachment set, they start at about $50.00 while a high end electric set can be as much as $650.00. The most important thing to consider when purchasing an attachment set is the type of flooring you have. If you have very thick pile carpeting, you need a kit that includes an electric powerhead with good height adjustment. If you have all hardfloors, you will want to purchase a barefloor set with more than one hardfloor tool. Below is an abbreviated guide to our attachment sets.

Here Are A Few Products We Like To Highlight!